RF24G module is a user-friendly bidirectional wireless transmitter and receiver module. Users can transmit data in various formats by using a single command through the connection of cmdBUS to the BASIC Commander. With the dynamic configurations through the software, users can switch the transmission or reception modes anytime or to change the transmission channel and identification code.

Feature

• Frequency band of the wireless transmission: 2.4 ~ 2.524 GHz.
• Wireless transmission mode: GFSK.
• Provides 256 sets of ID codes and Reg codes for the user to switch the identification dynamically through the software any time.
• store the data to be transmitted in the built-in temporary space first and then transmit them in a batch. Up to 40 Bytes can be stored.
• Provides string and array transmission commands.
• Measurement alarm events are provided.
• switch among the 125 channels dynamically through the software.
• Read out the current settings for verification or determine if the received data is still not read out yet.
• The wireless transmission coverage is up to about 280 meters.
• Switch the operation mode of the module as a transmitter or a receiver any time.

Projects

Here are some ideas to help you get started with this module:

• Wireless transmission of various data formats.
• Transmission of control signals to achieve the goal of wireless remote control.
• With the collaboration of four RF24G modules at the same time, full-duplex communications can be achieved.

See Also

❮ ❯

Accelerometer

Barometer

Color Module

Compass

Humidity

InnoBot