HDTV Antenna
& Tuner Box
EPROM, MCU
GPS, Receivers
GPRS/GSM/LTE Modules
LCD
RF Modules
Robotics
Voice Modules
Accessories

Credit Card Payment

Follow us on Twitter Facebook

ArminoTM

ARM Cortex M3 Development Board

Armino

Price: Call

Features Download Video

ArminoTM is a development board with HOLTEK’s HT32F1765 Cortex M3 microcontroller for users to learn electrornics, programming of ARM technology and to develop small projects or prototypes. It has many built in functions such as TIMER, RTC, UART, I2C, SPI, EEDATA. The board is equipped with Holtek e-Link32 debugging interface and it can be programmed with the Keil Development tool.

The ArminoTM also has cmdBusTM connectores to interface with object oriented Smart Module. Each Smart Module has its own built-in micro-controller to perform specific functions related to the module. This unique task distribution feature will help users to develop not only simple projects but also more complicated applications easily and rapidly. Armino Workshop board can be added on for prototypes and testing.

Features
  • 32-bit ARM® Cortex™-M3 processor core
  • Up to 72MHz operation frequency
  • Single-cycle multiplication and hardware division
  • 128KB Flash memory for instruction and data storage
  • 64KB on-chip SRAM for data storage
  • External 4 to 16MHz and 32,768Hz crystal oscillator
  • Internal 8MHz and 32kHz RC oscillator
  • 12-bit SAR ADC engine
  • Up to 1Msps conversion rate at 72MHz
  • 8 external analog input channels
  • Supply voltage range: 2.7 V ~ 3.6 V
  • Two Operational Amplifiers or Comparator software configurable
  • 80 GPIOs, almost all I/O pins are 5V-tolerant except for pins shared with analog inputs
  • Port A, B, C, D, E are mapped as 16 external interrupts
  • Two 16-bit General-Purpose Timers - GPTM
  • Up to 4-channel PWM Compare Output or Input Capture function for each GPTM
  • External trigger input
  • Two 32-bit compare/match count-up counters
  • One shot mode - counting stops after a match condition
  • Repetitive mode - restart counter after a match condition
  • 32-bit up-counter with a programmable prescaler
  • Alarm function. Interrupt and Wake-up event

cmdBus Connection
  • Built-in Innovati’s CMDBUS™ connectors
  • More than 25 CMDBUS™ modules available

Intefaces
Inter-integrated Circuit -- I2C
  • Support both master and slave mode with a frequency of up to 1MHz
  • Provide an arbitration function and clock synchronization
  • Supports 7-bit and 10-bit addressing mode and general call addressing
  • Supports slave multi-addressing mode with maskable address

Serial Peripheral Interface -- SPI
  • Supports both master and slave mode
  • Frequency of up to 36MHz for master mode and 18MHz for slave mode

Universal Asynchronous Receiver Transmitter -- UART
  • Operating frequency up to 4.5MHz
  • RS485 mode with output enable control
  • Auto hardware flow control mode - RTS, CTS
  • FIFO Depth: 16x9 bits for both receiver and transmitter

See also Ozone, Basic Commander

  • User Guide
  • Armino Library
  • Keil C Development Software
  • e-Link Keil Plugin
  • e-Link USB Drivers

    Armino Workshop    Armino + Armino Workshop
    Armino Workshop    Armino + Armino Workshop

    See also Smart Modules



  • Ozone controlling 32 Smart Modules


    Ozone with Raspberry PI


    Products
  • Robot Kits
  • Commander Module
  • Commander Boards
  • Development Boards
  • Smart Modules
  • General Modules
  • Accessories
  • InnoBasic
  • catalogue


    Resources
  • DIY Projects
  • ID MAP
  • Identifier List
  • InnoBasic Workshop

  • More Boards
  • Commander Board
  • Development Boards
  • Education Board
  • EV8
  • Homework Board
  • Ozone
  • Armino

  • FAQ | Terms & Conditions | Contact Us

    Copyright © 2017 Kowatec Corporation. All rights reserved.